What Photography Related Item Have You Bought or Sold This Week?

[AlphaWorld]

Many thanks is Craig. Do you think the PD slide and connectors are strong enough for the 300mm f2.8 and will it be comfortable for long walks?

The anchors are rated at 90kg, and the lens + body is under 3kg. I think they'll hold up

I have carried the 300 GM on a PD Slide or even Slide Lite for 4+ hours at a time (likewise the 50-150, which weighs about the same). I've done the same (but with the anchors attached to the lens lugs, rather than the body) with a Slide on the 100-400 f/4.5 (noticeably heavier) and with the 400-800 (over a kilo heavier). The 400-800 gets tiring, but it's just the weight - the step is laughing at my lack of fitness. I do cradle the 400-800 sometimes to relieve the weight on my neck - I'm going to try using the strap as a diagonal carry next time (so the weight doesn't rest on the back of my neck.

Absolutely no worries about the strength of the strap - just make sure the anchors are clicked into the ends of the strap (there's a nice positive click to confirm.

 

[CrankinSteve]

The anchors are rated at 90kg, and the lens + body is under 3kg. I think they'll hold up

I have carried the 300 GM on a PD Slide or even Slide Lite for 4+ hours at a time (likewise the 50-150, which weighs about the same). I've done the same (but with the anchors attached to the lens lugs, rather than the body) with a Slide on the 100-400 f/4.5 (noticeably heavier) and with the 400-800 (over a kilo heavier). The 400-800 gets tiring, but it's just the weight - the step is laughing at my lack of fitness. I do cradle the 400-800 sometimes to relieve the weight on my neck - I'm going to try using the strap as a diagonal carry next time (so the weight doesn't rest on the back of my neck.

Absolutely no worries about the strength of the strap - just make sure the anchors are clicked into the ends of the strap (there's a nice positive click to confirm.

I use the following for my 400-800 lens.

Wimberley AP-640 Replacement Foot for Sony FE 400-800mm​

Leofoto SP-01 Push Button Quick Detach Modular Tripod Strap, Left/Right Handed, Nylon Webbing​

Ultra Thick & Breathable Universal Shoulder Pad Cushion for Bag - Long & Comfort​

This is the link for the pad:
https://www.amazon.com/dp/B0FNK56BHZ?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1
The strap connects to the QD Quick Disconnect

I also have the Leofoto QD which allows me to use my Peak Design Straps as well.

Leofoto QD-1 Push-Button Quick-Detach Sling Swivel​

i hope this might be helpful. That Thick Shoulder pad is exceptionally helpful.

 

[Thad E Ginathom]

New Leofoto tripod (LN-364C) and 4-way geared head (G4PROM). Also, a RRS leveling base. I continue to be impressed with the quality of Leofoto gear. Its not at the level of RRS, but for half the cost (or less?) it get the job done with no complaints.

Geared heads are very sexy: they make me wish I used tripods!

 

[Landshark99]

New Leofoto tripod (LN-364C) and 4-way geared head (G4PROM). Also, a RRS leveling base. I continue to be impressed with the quality of Leofoto gear. Its not at the level of RRS, but for half the cost (or less?) it get the job done with no complaints.

I have a Leofoto G4PROM on the way this week, just wondering if I really need a leveling base to go with it. I will be putting this head on some Gitzo carbon legs I had used with my gimbal head with the leveling base. The gimbal is going on a new set of Gitzo legs I found on sale.

 

[Richard A]

I was looking at geared tripod heads a while ago but I decided, for what they are, they are too expensive. I also found out that they can wear quite quickly and replacement parts aren't available for a lot of them. I have been using my tripod quite a lot lately (and also my light travel tripod) and the three way head is fine to be honest. I'd rather spend that money on something else.

 

[THXGEEK]

I have a Leofoto G4PROM on the way this week, just wondering if I really need a leveling base to go with it. I will be putting this head on some Gitzo carbon legs I had used with my gimbal head with the leveling base. The gimbal is going on a new set of Gitzo legs I found on sale.

I prefer a leveling base because (for me) adjusting the legs a few mm at a time is a royal PITA. I'd much rather simply deploy the legs, lock 'em down and then make the final leveling adjustment at the head. YMMV of course.

 

[evacguy]

Does anyone have recommendations for third party snap on lens cap for the Sony GM 300 mm f2.8? I will need something I can use with the lens hood. What do you think about leather lens cap with the 300 mm? Is that sufficient? It seems a little clumsy and adds to the challenge of packing the lens.

 

[Landshark99]

I was looking at geared tripod heads a while ago but I decided, for what they are, they are too expensive. I also found out that they can wear quite quickly and replacement parts aren't available for a lot of them. I have been using my tripod quite a lot lately (and also my light travel tripod) and the three way head is fine to be honest. I'd rather spend that money on something else.

View attachment 85936

All depends on what you like, I prefer a ball head with a drag control over a three way for general use. I plan on trying the geared head for those times when I want more fine tuning control

 

[Landshark99]

I prefer a leveling base because (for me) adjusting the legs a few mm at a time is a royal PITA. I'd much rather simply deploy the legs, lock 'em down and then make the final leveling adjustment at the head. YMMV of course.That make sense I just ordered one to go with the geared head