Welcome to Our Sony Alpha Shooters Forum

Be apart of something great, join today!

Making your own kit.

mark.s

Active Member
Followers
0
Following
0
Joined
Aug 21, 2021
Posts
31
Likes Received
116
Trophy Points
33
Name
Mark Sturman
Just curious whether any of you have ever made anything for your camera kit or usage?
Going back several years I was frustrated with the lack of availability of things I wanted, either that or they were an all purpose/multi-fit item which never really fully met my needs.
I bought a sewing machine.
Not a clue on how to use this gadget but YouTube is a marvellous place for fools like me, where people blessed with such skills are prepared to share them.
I'll never profess to be good at this sewing malarky but I have made many items for myself and even given a few bits to close friends.
I made a Gore-Tex cover for my a1/600f4, with plenty of space at the camera end to be able to comfortably use it in heavy rain and with ability to still attach it to the tripod.
The same for my a1/300f2.8.
Various bags, with or without zips etc.Attached are images of the Gore-Tex cover on the a1/600f4 and also a pad on the tripod which acts as a shoulder buffer when I'm waalking with it all.
That pad comes off and doubles as a kneeling pad/seat base.
Yes, you can buy items like this but I make them for my own requirements and needs, plus, it's something to do when the weather is atrocious or my injuries restrict outdoor activities.
No, I don't make things for people, so it's not a sales pitch.
 

Attachments

  • 20251123_093025.jpg
    20251123_093025.jpg
    1.1 MB · Views: 9
  • 20251123_093049.jpg
    20251123_093049.jpg
    1.2 MB · Views: 7

* Please Consider Becoming a Site Supporter To Remove These Ads *

I haven't made anything for mine. I have never shied away from using the gear as is in the rain or snow.

Since you are using Gore-Tex for any of the stitched areas you will need to cover those with a heat-sealed strip for it to maintain water resistance. When Gore-Tex does their testing of products using their materials it is the quality of the sealing around the stitching that is really being tested.
 
The only stitches open to the weather are at each end, one with the elasticated part, the other with a draw cord, they're treated with Nikwax.
There are no other upward facing stitches, as the tube effect is stitched inernally at the underside where it attaches to the tripod.
It's far easier to remove this and give it a shake off when I get back to the car/accommodation than to dry an entire camera and lens set-up.
I've never had a water ingress issue yet and Dartmoor, the Scottish Highlands and other places tend to get a tad wet now and then.
 
Back
Top