Sony 200-600 Connection Issues. Not Displaying Aperture or Focusing

[Tim Mayo]

Has anybody had any connection issues with their 200-600? I attached mine to my A1 last week and the aperture just displayed as -- and the lens also failed to focus. The camera was also incredibly slow to turn on and off. I also tried it on my A7RV and had exactly the same problem. My A1 is also working fine with my other lenses so I can't see it being a camera issue. I've cleaned the contacts but the problem remains. I read over on the DPReview forums that someone had a similar issue and it was diagnosed as: "ZMR Assembly-Faulty F-stop". I've never needed to send a lens in for repair before so it will be interesting to see how that works and how much it costs!

 

[Uncle Kevriano]

I think that these companies should have to give a fully detailed report of what was replaced and why, with evidence that the did too. That's a big bill

 

[Soundmike]

Proofs in the pudding as they say ,let us know when you have tried it out . I recently came back from holiday and only took the 70-200 f2.8 with my old trusty A9II no problems ,but on my return used the 200-600mm for some barn owl shots and it just wouldn't focus properly. Jiggling the lens on the body made no difference . Came back home checked all the usual nothing to spot . Did factory reset went out again next day it was like a new lens . The only thing I did notice was that I had left Bluetooth and remote switched on but can't imagine this would make any difference .

 

[spudhead]

So my 200-600 is now back with me. Well it actually arrived a couple of weeks ago just before I went off on holiday but I didn't have the chance to try it out. So it took just under 4 weeks from when I sent it off to Fixation. The total bill including shipping it back to me was £679.33 Did they need to replace all of the parts that they said needed replacing? Apparently, although I have no way of knowing if that's the truth or not. Still, it was cheaper than a new lens although I probably wouldn't of replaced it since I'm very happy with the Sigma 500. But I may sell it at some point and hopefully I'll get a bit more for it than I paid to have it fixed.

I know of a site where you can sell it Tim

 

[Thad E Ginathom]

This is due to this lens having a history of the 5th lens group becoming faulty,

This bugs me. If it has a history of becoming faulty, then Sony should pay for it!

 

[andrewluke]

just searched google and some one else suffered the same problem but they do not mention the outcome,the person maybe a member on here and you maybe able to contact them for info??

Help: Sony 200-600mm lens focus issue: Show F---

 

[Brownie]

Wow Tim, that's not good news.

 

[iain clyne]

If your looking for estimates try Fixation in London, their part of WEX and its where I got my A1 fixed.

 

[spudhead]

yes now and then mine is a very early copy and I have never updated it, but it has always worked fine after turned off and on again

 

[AlphaWorld]

I'm sure you have already, but I'd take a pencil eraser or isopropyl alcohol to the contacts on the lens, and check that it turns all the way to locking into place.

I haven't had any trouble with the 200-600, but I don't use it a huge amount (it's on the edge of "too long / too heavy" for me).

 

[Tim Mayo]

I'm sure you have already, but I'd take a pencil eraser or isopropyl alcohol to the contacts on the lens, and check that it turns all the way to locking into place.

I haven't had any trouble with the 200-600, but I don't use it a huge amount (it's on the edge of "too long / too heavy" for me).

I've not tried an eraser yet just a lens wipe, will see if I can find one! It's locking into place just fine.

 

[Brownie]

I've not tried an eraser yet just a lens wipe, will see if I can find one! It's locking into place just fine.

Isopropyl alcohol and cotton swabs. Lens wipes won't cut. I'd to the erase and follow with the alcohol to clean up any residue.

 

[Tim Mayo]

Isopropyl alcohol and cotton swabs. Lens wipes won't cut. I'd to the erase and follow with the alcohol to clean up any residue.

I've done that now but it's still not working

 

[Brownie]

I've done that now but it's still not working

Another question: Did you try a different camera, and if not, did you try a factory reset?

 

[Uncle Kevriano]

Another question: Did you try a different camera, and if not, did you try a factory reset?

This...

 

[Tim Mayo]

Another question: Did you try a different camera, and if not, did you try a factory reset?

Yep. Tried my A7RV, A6700 and A7IV. Same problem.

 

[Brownie]

Sorry to hear that. Hope it isn't too expensive to fix.

 

[Tim Mayo]

Sorry to hear that. Hope it isn't too expensive to fix.

Me too! I need to contact a few places and get a rough idea of what I’m looking at. Still, hopefully the Sigma 500 should arrive next week so I’m not in a big rush to get it sorted as I don’t see it getting too much use once the Sigma arrives.

 

[andrewluke]

has this got the same problem as yours?

The Day The Sony Died | My Sony 200-600mm Broke For NO Reason!

My Sony 200-600mm Wildlife Photography Lens Died On Me - And I Don't Know Why! I was out doing some wildlife videography, and having a great time, until my l...

www.youtube.com

Sony Is ALIVE Again!! | Sony 200-600mm

My Sony 200-600mm Wildlife Lens Died A Few Months Ago (video linked below) - But It Is Back And It's Time For Some Wildlife Photography, Videography, And Mor...

www.youtube.com

 

[Tim Mayo]

has this got the same problem as yours?

The Day The Sony Died | My Sony 200-600mm Broke For NO Reason!

My Sony 200-600mm Wildlife Photography Lens Died On Me - And I Don't Know Why! I was out doing some wildlife videography, and having a great time, until my l...

www.youtube.com

Sony Is ALIVE Again!! | Sony 200-600mm

My Sony 200-600mm Wildlife Lens Died A Few Months Ago (video linked below) - But It Is Back And It's Time For Some Wildlife Photography, Videography, And Mor...

www.youtube.com

Thanks for sharing these Andrew. Yep, basically the same or very similar problem to mine. Mine also has quite a bit of play and always has done. Just about to contact a Sony service centre to see what they say.

 

[Tim Mayo]

When submitting an online repair request with Fixation they gave me an average cost of £82.36 - £352.14 for repairs to the 200-600. With the lower end being for minor issues and cleaning and the higher end when components need replacing.

They arranged the collection and it's being collected next week. Now I just need to find the lens cap which I recently lost and the original box which I fear I might have binned after a clean out when moving house!

 

[AlphaWorld]

When submitting an online repair request with Fixation they gave me an average cost of £82.36 - £352.14 for repairs to the 200-600. With the lower end being for minor issues and cleaning and the higher end when components need replacing.

They arranged the collection and it's being collected next week. Now I just need to find the lens cap which I recently lost and the original box which I fear I might have binned after a clean out when moving house!

Do you still have the soft case? That’s more important than the box - can always pack in soft case then bubble wrap and a suitable box.

 

[iamdlewis]

Has anybody had any connection issues with their 200-600? I attached mine to my A1 last week and the aperture just displayed as -- and the lens also failed to focus. The camera was also incredibly slow to turn on and off. I also tried it on my A7RV and had exactly the same problem. My A1 is also working fine with my other lenses so I can't see it being a camera issue. I've cleaned the contacts but the problem remains. I read over on the DPReview forums that someone had a similar issue and it was diagnosed as: "ZMR Assembly-Faulty F-stop". I've never needed to send a lens in for repair before so it will be interesting to see how that works and how much it costs!

Yes this happens to me. For an instant fix semi-remove the lens and attach, you don't need to fully remove the lens. For more of a fix make sure all the screws are tight on the lens connection point, this tends to be the issue most often. This also will occur more often when I forget to switch the strap from the camera to the lens.

 

[Tim Mayo]

Yes this happens to me. For an instant fix semi-remove the lens and attach, you don't need to fully remove the lens. For more of a fix make sure all the screws are tight on the lens connection point, this tends to be the issue most often. This also will occur more often when I forget to switch the strap from the camera to the lens.

Tried this but no joy. The screws are tight but they were coming a bit loose a while back so it’s definitely worth checking them now and again.

 

[Tim Mayo]

Do you still have the soft case? That’s more important than the box - can always pack in soft case then bubble wrap and a suitable box.

I should do somewhere, I don't normally bin the cases. It will definitely be well packed. I don't want to pay for replacement glass as well.

 

[Paul stuart]

I should do somewhere, I don't normally bin the cases. It will definitely be well packed. I don't want to pay for replacement glass as well.

Hope it goes well ,i have my sigma 500 5.6 super little lens but then so is the sony 200-600mm sony repair for me is just 8 miles away in horley surrey so i am good if this ever occurs ,very odd why this happened ,and obviously lens is not talking to camera it will be a electronic fault ,unless your mount is loose have you tried nipping up the screws on the lens mount over time these can come loose ,just need a jewllers screw driver

 

[georg.viertbauer@siemens.]

Has anybody had any connection issues with their 200-600? I attached mine to my A1 last week and the aperture just displayed as -- and the lens also failed to focus. The camera was also incredibly slow to turn on and off. I also tried it on my A7RV and had exactly the same problem. My A1 is also working fine with my other lenses so I can't see it being a camera issue. I've cleaned the contacts but the problem remains. I read over on the DPReview forums that someone had a similar issue and it was diagnosed as: "ZMR Assembly-Faulty F-stop". I've never needed to send a lens in for repair before so it will be interesting to see how that works and how much it costs!

had the same yesterday ... in my case because of wearing the heavy lense often over the body of my A1 ... it was needed to tighten the screews of the mounting plate on the cam side

 

[Tim Mayo]

had the same yesterday ... in my case because of wearing the heavy lense often over the body of my A1 ... it was needed to tighten the screews of the mounting plate on the cam side

Glad it was an easy fix for you! Unfortunately my screws are tight and I’ve tried it on 4 different cameras, all have the same issue. This might help someone though so thanks for sharing!

 

[Richard A]

Just out of interest, how old is the lens?

 

[Tim Mayo]

Just out of interest, how old is the lens?

I bought it when it was launched so I think it’s getting on for 5 years now.