The latest firmware update for the Sony a7R V (ILCE-7RM5) is now version v2.02.
Table of Contents[Hide][Show]
If you find this guide helpful then you might also find my Sony a7R V Memory Card Guide helpful where I’ve tested 19 memory cards in-camera. My Sony a7R V Accessories Guide might come in handy as well.
Firmware Version 2.02 Benefits and Improvements
- Fixes an issue where the camera could restart if many faces were simultaneously recognized at the same time when shooting a movies
- Fixes an issue where the time code wasn’t always retained after a power restart
- Fixes an issue where the certain custom key operations may cause the restart
- Improves the exposure stability when using extended ISO during movie recordings
- Improves the operational stability of the camera
Firmware Download
If you are using Sony’s Creators App then you can also download and install the firmware through the Creators App. See here for further details.
Alternatively you can download the latest firmware from your local Sony support website. The below links will take you to the correct page to download the firmware.
Read this section before downloading the file.
Precautions when updating from Ver. 1.00
- For customers who have been using the Imaging Edge Mobile app:
- Updated cameras will no longer be able to connect to the Imaging Edge Mobile app. After updating the camera, install the Creators’ App.
- Please make sure the Imaging Edge Mobile app is the latest version (Ver.7.7.2 or later) in order to pair the camera with the Creators’ App.
- For instructions on installing and connecting the Creators’ App, please refer to Migrating from Imaging Edge Mobile app to Creators’ App.
- If you use the Wireless Remote Commander/Shooting grip (GP-VPT2BT, RMT-P1BT), delete it from the Bluetooth Settings on the camera menu. Then pair the camera with the Wireless Remote Commander/Shooting grip again.
Sony A7R V Forum & Facebook Group
If you are looking for further help and advice on the a7R V or would simply like to share your photos and videos, then please head over to our friendly Forum. If you prefer Facebook then we also run the Sony a7R V + a7R IV Shooters Group.
Firmware Installation Guide
If you are using Sony’s Creators App then you can download and install the firmware through the Creators App. See here for further details.
Alternatively see the below guide to install via memory card:
Check the system software version
Follow the instructions below to check the system software version. If the system software version is Ver. 2.02, the update is not required.
Note: If the Date/Time setting screen appears when you turn on your camera, be sure to set the date and time to the correct values.
- On the camera, select Menu → Setup → Setup Option → Version.
- The system software version is displayed.
Saving system software data to a memory card
WARNING! Make sure that there is only one BODYDATA.DAT file on the memory card.
Insert the formatted memory card into a computer. Save the data in the root directory of the memory card.
Note: Do not change the file name.
Other Hardware
Power source for the camera: Use a fully charged rechargeable battery pack NP-FZ100.
Note: The update can only be performed when the battery power level is (three bars) or more or above 51%. We recommend that you use a fully charged battery. Detach the vertical grip before updating the system software.
Updating the System Software Version
Important Notice
- Use a fully charged rechargeable battery pack (NP-FZ100).
- Do not remove the battery during the update as the sudden loss of power may render the camera inoperable.
- It may not be possible to update if the camera temperature is high. Please go after the temperature drops.
Step 1: How to download the Updater
- Insert the memory card on which the system software data was saved, into slot 1 of the unit.
Note: Only slot 1 recognizes the system software data. - Select Menu → Setup → Setup Option → Version and select Software Update.
- Select Execute on the system software update confirmation screen and the update starts.
Notes:- A Version Update X.XX → Y.YY message appears (X.XX = the existing version number, Y.YY = the latest version number).
- Do not remove the battery and the memory card during the update.
- When the system software update starts, a black screen is displayed, and the access lamp is lit. The access lamp will blink 1 time → 3 times → 5 times depending on the progress of the update. The update will take approximately 6 minutes to complete.
Notes:- If the system software data copy is incorrect, The target model for the update file is incorrect. will be displayed on the monitor of the camera.
- If the access lamp repeats 5 long blinks (0.5s cycle) and 6 short blinks (0.25s cycle), the system software may not have been copied correctly to the memory card. In this case, remove the battery and memory card from the camera, and start over at Saving system software data to a memory card.
- When the update is completed, the camera will automatically restart.
Step 2: Confirm the system software version of your device
- On the camera, select Menu → Setup → Setup Option → Version.
- The system software version is displayed.
Previous Firmware Versions
Normally improvements from previous firmware versions are always included in the latest firmware version. So even if you have missed a couple of firmware versions, you only ever need to install the latest version.
v2.01
- Fixes an issue where JPEG files could not be enlarged and played
- Fixes an issue where the power may not turn on or turn off even if the Power switch is used
- Fixes an issue where the Switch V/H AF Area feature may not work correctly
- Fixes a Creators’ App issue where the Auto Time Correction and Auto Area Adjustment features may turn off
- Improves the operational stability of the camera
v2.00
- Adds support for the Creators’ App
Note: The new Creators’ App mobile application replaces the Imaging Edge Mobile app. The Creators’ App allows you to transfer images from the camera to your smartphone, shoot remotely, and use various other functions. - Adds a function that improves security when connecting with the Creators’ App and Imaging Edge Desktop software for remote shooting and image transfers
Note: Please update the Imaging Edge Desktop software to the latest version (Ver.3.6 or later) - Adds a function to switch the face that is prioritized for focus with a custom key
- Improves the operational stability of the camera
v1.00
This was the Sony a7R V Release Firmware.
Benjimen Barker
Question. Do you know if there going to put out a update for the a7rIV camera?
Timothy Mayo
I wouldn’t expect any new features added via firmware update for this camera now, especially with the a7RV out. There might be new firmware updates to address compatibility issues with new lenses though.